模板型号：SC95F8617B
模板使用IC资源：PWM0,DDIC_LED,GPIO,ADC
模板使用驱动资源：
模板说明：EBS002 基础功能扩展板功能演示示例。演示RGB、数码管、热敏电阻、可调电阻、蜂鸣器等器件的功能，共有六种模式。
                 模式0：三色RGB呼吸灯示例，有周期调节功能，修改RGB扫描函数中CycleNum的值，可以改变呼吸周期。通过板上的K1、K2按键，可以改变呼吸周期
                 模式1：硬件LED驱动扫描数码管显示，在数码管上显示分：秒，范围从00：00到59：59
                 模式2：软件使用GPIO扫描数码管引脚进行显示，显示分：秒，范围从00：00到59：59
                 模式3：使用ADC采样AIN7上的热敏电阻的电压，通过查表法转换为温度值，在数码管上显示
                 模式4：使用ADC采样AIN15上的可调电阻，在数码管上显示ADC采样值
                 模式5：PWM驱动无源蜂鸣器，通过板上K1、K2控制，任意按下，蜂鸣器响一下
Template model: SC95F8617B
The Template uses the IC resource: PWM0,DDIC_LED,GPIO,ADC
The template uses the driver resource:  
Template description: EBS002 Basic function expansion board function demonstration example. Demonstrate the functions of RGB, digital tube, thermistor, adjustable resistor, buzzer and other devices in six modes.
     Mode 0: 3-color RGB breathing light example with cycle adjustment function. Modify the value of CycleNum in the RGB scan function to change the breathing cycle. The breathing cycle can be changed by the K1 and K2 buttons on the board
     Mode 1: Hardware LED drive scanning digital tube display, display minutes:seconds on the digital tube, range from 00:00 to 59:59
     Mode 2: Software uses GPIO to scan digital tube pins for displaying minutes:seconds in the range from 00:00 to 59:59
     Mode 3: Use ADC to sample the voltage of the thermistor on AIN7, convert it to temperature value by table look-up method, and display it on the digital tube
     Mode 4: Use the adjustable resistor on the ADC sampling AIN15 to display the ADC sampling value on the digital tube
     Mode 5: PWM driven passive buzzer, controlled by K1 and K2 on the board, press at any time, the buzzer will sound once